Having a furnace that is not working properly can be a major inconvenience, especially during the cold winter months in Downriver Michigan. Fortunately, there are many common repairs that homeowners can do on their own to get their furnaces back up and running without spending too much money or time.
In this article we will provide an overview of some of the most common furnace repairs in Downriver Michigan and what you should expect to pay for each repair. We will also discuss how to determine if it is best to call a professional for more complex issues. With this information, you can save yourself from unnecessary expenses and have your home warm again in no time!
- An Overview of Common Furnace Repairs in Downriver Michigan and Their Costs
- Always Use a Professional HVAC Contractor
- Frequently Asked Questions
An Overview of Common Furnace Repairs in Downriver Michigan and Their Costs
Replacing a Heat Exchanger
A heat exchanger can become corroded or cracked over time, causing it to lose efficiency. Replacing a heat exchanger typically one of the most expensive parts of the furnace to replace. When a heat exchanger goes out it’s usually a better idea to replace the furnace rather than repair it due to the high cost of replacing the heat exchanger.
Replacing Blower Motors
The blower motor on your furnace is responsible for circulating air throughout your home by pushing it through the ducts. If this part has become damaged or worn, you will need to replace it in order to get your furnace working properly again. Sometimes the blower motor can start to fail and move less air through the vents which ultimately uses more energy. The cost of a new blower motor depends on the make and model of your furnace, but you can expect to pay anywhere from $200-$400 plus labor costs for installation of the blower motor and associated components such as capacitors and relays.
Replacing the Pilot Light Assembly
The pilot light assembly is responsible for igniting and maintaining a flame that will heat up the exchanger in your furnace. If this part has become damaged or dirty, it may need to be replaced. Sometimes the part can be cleaned as well to begin performing again. The cost of a new pilot light assembly will depend on the make and model of your furnace, but you can expect to pay anywhere from $100-$200 for the parts in addition to labor costs.
Replacing / Repairing a Thermostat
The thermostat in your furnace helps control the temperature of your home by telling the furnace when to turn on and off. If your thermostat is not working properly, it could be the cause of your furnace not running or running erratically. The cost of repairing or replacing a thermostat will depend on the type and make of your current model, but you can expect to pay anywhere from $150-$250 for parts and labor. It’s best to upgrade your thermostat to a smart thermostat to save on energy costs.
Replacing Igniter or Flame Sensor
The igniter and flame sensor are responsible for starting up your furnace by creating sparks to ignite the gas in the burners. If these parts become worn out, damaged, or dirty, they will need to be replaced in order for your furnace to heat up again. The cost of replacing an igniter or flame sensor will depend on the make and model of your furnace, but you can expect to pay anywhere from $200-$500 for this service.
Always Use a Professional HVAC Contractor
If your home’s furnace is in need of repairs, be sure to call a professional HVAC contractor. Improper repairs to your furnace is very dangerous and can lead to all sorts of problems in your home. A professional HVAC contractor will be able to diagnose and repair your furnace quickly, efficiently, and safely. The cost of hiring a professional depends on the complexity of the job, but it’s much better to make sure your furnace is safe to use. Do not attempt a do it yourself repair on your furnace, it’s not worth it.
With this information, you now have an understanding of some of the most common furnace repairs in Downriver Michigan and what you should expect to pay for each repair. If your furnace is failing or having problems be sure to call the experts at Superior Comfort Heating and Cooling in Downriver Michigan today at 734-818-7141.
Frequently Asked Questions
What is the average cost of furnace repairs in Downriver Michigan?
The exact cost of furnace repairs will depend on the type and make of your current model, but you can expect to pay anywhere from $100-$500 for parts and labor.
Is it safe to do my own furnace repairs?
No. Improper repairs to your furnace is very dangerous and can lead to all sorts of problems in your home. It’s best to always use a professional HVAC contractor for any type of repair work on your furnace.
Who should I call if I need assistance with furnace repairs in Downriver Michigan?
If you are in need of assistance with furnace repairs in Downriver Michigan, be sure to call the experts at Superior Comfort Heating and Cooling at 734-818-7141. They are experienced professionals that can quickly diagnose and repair your furnace safely and efficiently.